Learn ‘how to fix Brother printer error light flashing‘ no matter what you try to fix it. Don’t worry, you are not alone. Many Brother printer users encounter this issue. Some of the common causes of Brother printer error light flashing are – empty toner cartridges, paper jams, dirty print heads, outdated printer drivers, etc.
In this guide, we will show you how to fix Brother printer error light flashing. After reading this guide, you will be able to troubleshoot this issue and get your Brother printer working properly again. So, without wasting your valuable time, let’s proceed to fix Brother printer error light flashing.
Brother Printer Error Light Flashing (Common Causes)
There are several factors that can cause your Brother printer error light to flash.
Common reasons for a Brother printer error light flashing include:
- Paper jam: Paper jam is the most common cause of Brother printer error light flashing. Check all paper paths, including the duplex unit, for jammed paper.
- Low or empty toner: Check the toner levels in each cartridge and replace them if necessary.
- Dirty drum unit: Dust or toner buildup on the drum can cause Brother printer error light flashing. So, make sure to clean the drum unit regularly.
- Incorrect paper size: Make sure the paper size loaded matches the setting on your Brother printer.
- Open cover: Check if any covers on your Brother printer are open, including the front and back.
- Drum error: Also, if the drum unit is nearing the end of its life, your Brother printer may indicate an error.
- Print overrun: When the printer attempts to print a document that is too large for its memory.
How to Fix Brother Printer Error Light Flashing?
If you are encountering the Brother printer error light flashing, there are a few troubleshooting steps you can try to fix this problem. Here are the ways how to fix Brother printer error light flashing:
Reload the Paper
In order to reload the paper in your Brother printer, follow the steps given below:
- Firstly, open the paper tray.
- Look for any loose sheets. If you find any, remove them from the paper tray.
- Check the paper tray for any obstacles, including torn paper or foreign objects.
- Load a stack of paper in the paper tray with the printing surface facing down. Make sure the papers are below the maximum paper mark.
- Adjust the paper guides so that they fit securely around the edges of the stack of paper.
- Lastly, gently close the cover and ensure it’s securely latched.
Check Toner Cartridges
- Ensure all toner cartridges are installed correctly and securely.
- Further, check if any cartridges are low on toner.
- If any cartridge is low on toner, then consider replacing it with a new ink cartridge.
Here is how to replace the ink cartridge:
- Make sure your Brother printer is powered off.
- Then, open the front cover.
- Next, remove the old toner cartridge.
- After that, unpack the new toner cartridge. Hold it with both hands and firmly shake it from side to side multiple times to spread the toner evenly inside.
- Then, remove the protective cover.
- Put the new toner cartridge gently. Remember that each color has its own correct position.
- Close the front cover.
- Turn on your Brother printer to see if the issue is fixed.
Update the Printer Software
Outdated printer software can also cause Brother printer error light flashing. Here is how to update Brother printer software:
- First, visit the official Brother website. http://setup.brother.com/
- Then, navigate to the Software & Driver page.
- Download the latest printer software for your Brother printer model.
- Next, install the software on your device.
- After that, connect your Brother printer to the computer via a USB cable.
- Open the downloaded printer software on your computer. Then, follow the instructions to upgrade your Brother printer’s firmware.
- After the firmware update is complete, restart your Brother printer to see if the error light flashing issue is fixed.
Clean the Printhead
A dirty printhead can also cause ‘Brother printer error light flashing‘. In order to clean the printhead of your Brother printer, follow the steps below:
- Firstly, turn off your Brother printer.
- Unplug the printer from the power source.
- Then, carefully remove the ink cartridges from your Brother printer.
- After that, gently wipe the printhead with a clean, dry cloth to remove any excess ink. Avoid excessive rubbing, which could damage the delicate nozzle area.
- Then, reinstall the cartridges into the printer. Make sure they are properly aligned.
- Next, reconnect the printer to the power outlet and turn it on.
- Hopefully, this will have fixed Brother printer error light flashing.
How to Hard Reset Brother Printer?
If your Brother printer error light is still flashing after trying all the steps above, then you will need to perform a hard reset or factory reset. This will reset your printer to factory default settings and will hopefully ‘fix Brother printer error light flashing‘.
In order to perform a hard reset on your Brother printer, follow the steps below:
- Firstly, turn off your Brother printer.
- Unplug the printer from the power source.
- Then, reconnect the printer to the power outlet and turn it on.
- Next, press and hold the Reset button (or a similar button, depending on your Brother printer model) for at least five seconds. This will usually reset your Brother printer to factory settings.
- Now, check whether the Brother Printer Error Light Flashing is fixed.
Frequently Asked Questions (FAQs)
Why Is My Brother Printer Paper light flashing?
The ‘flashing LED indicator‘ on your Brother printer can be triggered by several issues. The issues include no paper in the manual feed slot, a paper jam, an open front cover, an open back cover, dust on the drum, or the absence of a drum. Further, make sure the drum unit and toner cartridge are properly installed in the machine before proceeding.
Why Is My Brother Printer Orange light flashing?
The ‘flashing orange light‘ on your Brother printer typically indicates that the printer is in “cooling mode.” This means the print head is too hot and needs to cool down before printing again. So, simply wait until the light stops flashing. Once the orange light stops flashing, your Brother printer is ready to print again.
Why Is the ‘Error light flashing On My Brother Printer’?
A flashing error light on your Brother printer usually indicates a paper jam, an improperly installed toner cartridge, an open cover, low toner levels, a faulty drum unit, a memory full error, a print overrun error, or a problem with the printer’s internal components.
In order to fix Brother printer error light flashing, please follow the steps mentioned above.